Related Manuals for Makita 6934
Summary of Contents for Makita 6934
- Page 1 Cordless Impact Wrench MODEL 6934FD 004367 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
SPECIFICATIONS Model Standard bolt Capacities High tensile bolt Square drive No load speed (RPM) Impacts per minute Max. fastening torque Overall length Net weight Battery Cartridge Voltage 1422 1434 14.4 V 1435 • Manufacturer reserves the right to change specifications without notice. •... - Page 3 SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
-
Page 4: Specific Safety Rules
18. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. 19. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. - Page 5 (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable marked on the charger label. Other types of batteries may burst causing personal injury and damage.
- Page 6 c. That wire size is at least as large as the one specified in the table below. Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS Length of Cord (Feet) AWG Size of Cord 9. Do not operate charger with damaged cord or plug - replace them immediately.
- Page 7 7. Do not incinerate the Battery Cartridge even if it is severely damaged or is com- pletely worn out. The battery cartridge can explode in a fire. SAVE THESE INSTRUCTIONS 8. Be careful not to drop, shake or strike bat- tery.
-
Page 8: Functional Description
FUNCTIONAL DESCRIPTION 004341 1. Button 2. Battery cartridge 004346 1. Battery cartridge 2. Charging light 3. Battery Charger CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge •... - Page 9 NOTE: • The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge.
-
Page 10: Electric Brake
Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. Lighting up the front lamp CAUTION: •... - Page 11 ASSEMBLY 004371 1. Socket 2. Anvil CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Selecting correct socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut.
-
Page 12: Operation
OPERATION 004373 Standard bolt (1428) (kgf cm) (1224) (1020) (816) (612) (408) (204) Fastening time 004374 High tensile bolt (kgf cm) (1428) (1224) (1020) (816) (612) (408) (204) 3.0 4.0 5.0 (S) 1.0 2.0 Fastening time The proper fastening torque may differ depending upon the kind or size of the bolt, the material of the workpiece to be fastened, etc. -
Page 13: Maintenance
Makita Authorized or Factory Service Centers, always using Makita replacement parts. Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. - Page 14 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 15 Memo...
- Page 16 Memo...
- Page 17 Makita Canada Inc. 1950 Forbes Street, Whitby, Ontario L1N 7B7 Fold Stamp Timbre...
- Page 18 Street Address City AGE: Under 19 Occupation: Dealer's Name & Address: Paste Paste Paste 3. How did you first learn of Makita Power Tools? Magazine/Newspaper From dealer Store display 4. Most favored points are? Design Features Size Price Model No.
- Page 19 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Package carefully and send prepaid to the nearest Makita factory or authorized service centre (905) 571 - 2200 1-800-263-3734 (604) 272 - 3104 1-800-663-0909...
- Page 20 WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...