Canon imageRUNNER 7095 Service Manual page 58

Hide thumbs Also See for imageRUNNER 7095:

Table of Contents

3) While holding down the front and rear of the

transfer/separation charging assembly [1], pull

it by 1 cm toward the front; then, detach it

toward the upper left.

Using alcohol, clean the transfer/ separation

charging wire.

4) While keeping the following in mind, mount

the transfer/separation charging assembly:

- The solvent must completely be dry.

- The gut wire must not be brought into contact

with the transfer guide [1] to avoid a cut.

- The grounding plate [2] must be on the outside

of the charging assembly frame [3] (See the

5) Connect the connector of the transfer/

separation charging assembly, and mount the

6) Using a screw, mount the toner/separation

charging assembly front cover.

Push in the fixing/feeding assembly inside the

machine, and shift the fixing/feeding assembly

releasing lever [1] back into position.

7) Remove the screw [1], and detach the primary

charging assembly front cover [2].

8) Disconnect the connector [1], and release the

locking lever [3] of the primary charging

assembly [2]; then, take out the primary

charging assembly.

Using alcohol, clean the primary charging

assembly and the grid wire.

Do not start mounting work before the solvent has

become completely dry.

Chapters

Table of Contents

Imagerunner 7105 Imagerunner 7086