Adjusting The Feed Amount; Selecting A Feed Amount Adjustment Method - Canon iPF8400S User Manual
Hide thumbs
Also See for iPF8400S:
- Service manual (312 pages) ,
- Basic manual (160 pages) ,
- Setup manual (16 pages)
Table of Contents
Advertisement
Adjusting the Feed Amount
Adjusting the feed amount
Adjusting the feed amount
Adjusting the Feed Amount ....................................................................................................................................... 718
Selecting a Feed Amount Adjustment Method ........................................................................................... 718
Automatic Banding Adjustment ......................................................................................................................... 719
Manual Banding Adjustment ............................................................................................................................... 720
Fine-Tuning the Paper Feed Amount ............................................................................................................... 722
Adjusting Line Length ............................................................................................................................................ 722
Adjusting the Vacuum Strength .............................................................................................................................. 724
Adjusting the Feed Amount
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
Banding in different colors
•
Line length is not accurate in the direction paper is fed
•
To adjust the feed amount, do the following, in this order.
1
Depending on the issue, adjust Adj. Priority to suit the particular type of paper.
(See "Selecting a Feed Amount Adjustment Method.")
2
Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.
(See "Automatic Banding Adjustment.")
(See "Manual Banding Adjustment.")
(See "Adjusting Line Length.")
3
After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.
(See "Fine-Tuning the Paper Feed Amount.")
Selecting a Feed Amount Adjustment Method
Selecting a Feed Amount Adjustment Method
There are two methods of adjusting the paper feed amount, Print Quality and Print Length, either of which will be
applied during printing.
Since the method that is applied during printing is determined from the value of the Adj. Priority setting, configure
the Adj. Priority to match the print target.
Print Quality : Adjusts the feed amount to reduce banding across the sheet in printed documents.
•
Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are applied
in addition to the Adj. Quality settings.
Print Length : Adjusts the feed amount for better accuracy of lines in printed documents.
•
The settings of A:High or B:Standard/Draft in Adjust Length are applied.
Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printer
•
driver at the time of printing.
Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at the
•
time of printing.
Note
Follow these steps to configure the settings.
1
Load the paper.
718
Attaching the Roll Holder to Rolls
•
Loading Rolls in the Printer
•
Loading Sheets in the Printer
•
P.718
➔
P.719
➔
P.720
➔
P.722
➔
P.722
➔
P.469
➔
P.471
➔
P.492
➔
iPF8400S
User's Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
