The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen; The Printer Ejects Blank, Unprinted Paper - Canon iPF8400S User Manual

Hide thumbs Also See for iPF8400S:

Table of Contents

The printer stops during a print job

An error message is shown on the Display Screen ......................................................................................... 862

An error message is shown on the Display Screen

The last portion of roll paper was used during a print job, and paper could not be

advanced because the trailing edge is taped to the roll.

The printer ejects blank, unprinted paper

The leading edge of the roll paper was

cut to straighten it.

The Printhead nozzles are clogged.

A print job was received from an incom-

patible printer driver.

The printer is damaged.

The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other

than Off in the Control Panel menu.

(See "Cutting the Leading Edge of Roll Paper Automatically.")

Print a test pattern to check the nozzles and make sure the Printhead is in good condition for

(See "Checking for Nozzle Clogging.")

Use the correct imagePROGRAF printer driver for the printer and try printing again.

Contact your Canon dealer for assistance.

Corrective Action

Remove the used roll and insert a new roll.

(See "Removing the Roll from the Printer.")

(See "Removing the Roll Holder from Rolls.")

(See "Loading and Printing on Rolls.")

Corrective Action

User's Guide

Show Quick Links

Table of Contents