Center Ventilation Louver Removal And Installation; Side Ventilation Louver Removal And Installation - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
Center Ventilation Louver Removal and
Installation
Removal
1) Disconnect negative (–) cable from battery.
2) Remove audio unit from instrument panel referring to
"Audio Unit Removal and Installation (If Equipped) in
Section 9C".
3) Remove center ventilation louver (1) with garnish (2)
from instrument panel, and then disconnect
connector from hazard switch.
NOTE
Garnish is fitted to instrument panel with six
clips. When removing garnish from
instrument panel, be careful not to break
them.
4) Separate center ventilation louver and garnish.
2
Installation
Reverse removal procedure.
Side Ventilation Louver Removal and
Installation
Removal
1) Remove instrument panel from vehicle body
referring to "Instrument Panel Removal and
Installation in Section 9C"
2) Remove steering support member (1), defroster
nozzle (2) and ventilator duct (3) from instrument
panel.
3
S7RW0A7106014
1
I5RW0A710008-01
S7RW0A7106015
2
1
I5RW0A710009-01
Heater and Ventilation:
3) Remove side ventilation louver (1) from instrument
panel while pressing clips (2).
1
Installation
Reverse removal procedure noting the following
instruction.
• Side ventilation louver is fitted to instrument panel
with four clips (1). When installing side ventilation
louver to instrument panel, position the smallest clip to
the top.
7A-11
2
2
I5RW0A710010-01
1
1
I5RW0A710011-01
Advertisement
Chapters
Table of Contents
Troubleshooting
