External Earpiece; Vibra Circuitry - Nokia n80 User Manual
Hide thumbs
Also See for n80:
- User manual (142 pages) ,
- Manual (128 pages) ,
- Aplicaciones adicionales manual (33 pages)
Table of Contents
Advertisement
RM-91; RM-92
Nokia Customer Care
System Module
External earpiece
All galvanic accessories are connected to the system connector.
The accessory audio mode is automatically enabled/disabled during connection/disconnection of dedicated
phone accessories.
The EM ASIC (N2200) provides two output channels in either single-ended or differential format. N2200
outputs XearL and XearLC form the left channel audio output, and XearR and XearRC the right channel audio
output. XearLC and XearRC are the ground pins if the output works in a single-ended operation.
In the system connector side, HSEAR P and HSEAR N form the left channel output, and HSEAR R P and HSEAR
R N the right channel output. Respectively, HSEAR N and HSEAR R N are the ground pins if the output works
in a single-ended operation.
Figure 103 External earpiece circuitry (system connector connected on the right)
Vibra circuitry
Vibra is used for vibra-alarm function.
The vibra motor is connected to the EM ASIC (N2200) VibraP and VibraN Pulse Width Modulated (PWM) outputs.
Figure 104 Vibra circuitry
Page 9 –26
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2006 Nokia. All rights reserved.
Advertisement
Chapters
Table of Contents
Troubleshooting
