Table of Contents
Advertisement
Faxing Letter size documents
from the scanner glass
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 0.
c
Press a or b to choose Letter.
Press OK.
d
Press Stop/Exit.
Colour fax transmission
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if Real Time TX is
set to Off).
Cancelling a fax in progress
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
Broadcasting
(Monochrome only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers and up to 50 manually dialled
.
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Make sure you are in Fax mode
b
Load your document.
c
Enter a number. Press OK.
5
You can use either a Speed Dial, a
Group or a manually entered number
using the dial pad.
d
Repeat c until you have entered all the
fax numbers you wish to broadcast to.
e
Press Mono Start.
Note
5
• If you did not use up any of the numbers
for Groups, you can 'broadcast' faxes to
as many as 90 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.
Sending a fax
5
.
5
25
Advertisement
Table of Contents
