Table of Contents
Advertisement
12
Printing photos from a camera
Printing photos
directly from a
PictBridge camera
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge. See
Printing photos directly from a digital camera
(without PictBridge) on page 69.
PictBridge requirements
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center™ operations are
not available when using the PictBridge
feature.
Setting your digital camera
Make sure your camera is in PictBridge
mode. Some of the settings listed below may
not be available for your PictBridge
compatible digital camera.
Depending on your camera some of these
settings may not be available.
Camera Menu
12
Selections
Paper Size
Paper Type
Layout
1
DPOF setting
Print Quality
1
See DPOF printing on page 68 for more details.
2
If your camera is set to use the Printer Settings
12
(Default setting), the machine will print your photo
using the following settings.
Settings
Paper Size
Paper Type
Layout
Print Quality
When your camera does not have any
menu selections, this setting is also used.
The names and availability of each setting
depends on the specification of your
camera.
12
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Options
10×15cm, Printer Settings
2
(Default setting)
Plain Paper,
Glossy Paper,
Inkjet Paper,
Printer Settings (Default
2
setting)
Borderless: On,
Borderless: Off,
Printer Settings (Default
2
setting)
-
Normal, Fine,
Printer Settings (Default
2
setting)
Options
10×15cm
Glossy Paper
Borderless: On
Fine
12
12
67
Advertisement
Table of Contents
