NEC X555UNS Installation Manual
55” led lcd display
Hide thumbs
Also See for X555UNS:
- Installation manual (3 pages) ,
- Installation manual (3 pages) ,
- User manual (56 pages)
Advertisement
X555UNS/X555UNV Installation Guide
55" LED LCD Display
Contents
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front and all Sides
Back
TMX4P and TMX9P Outer Dimensions
Input Panel
Control Codes
Cable Connections
Browser Control
Product
Maximum Supported Resolution
Power Consumption (Typical - Single Display)
Power Consumption (Max - Single Display)
BTU's (Typical - Single Display)
BTU's (Max - Single Display)
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
www.necdisplay.com
Display Resolution
Net Dimensions
Net Weight
FCC
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 5
Page 6
Page 6
Page 7
X555UNS
1920 x 1080 at 60Hz
3840 x 2160 at 30Hz
205W
385W
699.49 BTU/hour
1313.68 BTU/hour
47.8 x 26.9 x 3.8 in ./ 1213.4 x 684.2 x 95.3 mm
65.0lbs / 29.5kg
Class A
X555UNS/X555UNV
Rev 1.0
X555UNV
140W
290W
477.70 BTU/hour
989.52 BTU/hour
Page 1 of 7
Advertisement
Table of Contents
Related Manuals for NEC X555UNS
Summary of Contents for NEC X555UNS
- Page 1 NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 Contents Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Front and all Sides Page 3...
- Page 2 The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
-
Page 3: Display Dimensions
NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 Display dimensions Note This product is not symmetrical. www.necdisplay.com X555UNS/X555UNV Page 3 of 7... - Page 4 NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 Display dimensions (cont.) www.necdisplay.com X555UNS/X555UNV Page 4 of 7...
- Page 5 NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 X554UN-TMX4P and X554UN-TMX9P Outer Dimensions with Peerless DS-VW765-LAND Note: KT-55UN-OF3 Overframe Bezel Kit not pictured Input Panel (Bottom) Red circles in the above interface connections signify the IN of that particular connector. Blue circles in the above interface representations signify the OUT for that particular connector www.necdisplay.com...
-
Page 6: Control Codes
NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 Control Codes NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Interface: TCP/IP (Ethernet) -
Page 7: Browser Control
NEC Display Solutions of America, Inc. X555UNS/X555UNV Installation Guide 55” LED LCD Display Rev 1.0 Browser Control Information and control can also be available through the HTTP browser control menu. In order to accomplish this, type: http://<the Monitor’s IP address>/pd_index.html Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.