Removing The System Board; Prerequisites; Procedure - Dell Inspiron 13 Service Manual
7000 series
Hide thumbs
Also See for Inspiron 13:
- Quick start manual (3 pages) ,
- Service manual (135 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
Removing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the desired
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect them correctly after
you replace the system board.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
memory
4
Remove the fan.
5
Remove the
heat
Procedure
1
Remove the screws that secure the display-cable bracket to the system board
and lift the display-cable bracket off the system board.
2
Using the pull tab, disconnect the display cable from the system board.
62
computer. After working inside your computer, follow
After working inside your
cover.
module.
sink.
computer. For more safety best
Before
Advertisement
Table of Contents
