hit counter script

Configuring Location Tlv And Wired Location Service - Cisco Catalyst 3750-E Software Configuration Manual

Hide thumbs Also See for Catalyst 3750-E:
Table of Contents

Advertisement

Chapter 28
Configuring LLDP, LLDP-MED, and Wired Location Service
Command
Step 7
lldp med-tlv-select network-policy
Step 8
end
Step 9
show network-policy profile
Step 10
copy running-config startup-config
Use the no form of each command to return to the default setting.
This example shows how to configure VLAN 100 for voice application with CoS and to enable the
network-policy profile and network-policy TLV on an interface:
Switch# configure terminal
Switch(config)# network-policy profile 1
Switch(config-network-policy)# voice vlan 100 cos 4
Switch(config)# exit
Switch# configure terminal
Switch# interface_id
Switch(config-if)# network-policy profile 1
Switch(config-if)# lldp med-tlv-select network-policy
This example shows how to configure the voice application type for the native VLAN with priority
tagging:
Switch(config-network-policy)# voice vlan dot1p cos 4
Switch(config-network-policy)# voice vlan dot1p dscp 34

Configuring Location TLV and Wired Location Service

Beginning in privileged EXEC mode, follow these steps to configure location information for an
endpoint and to apply it to an interface.
Command
Step 1
configure terminal
Step 2
location {admin-tag string | civic-location
identifier id | elin-location string identifier
id}
Step 3
exit
Step 4
interface interface-id
OL-9775-08
Configuring LLDP, LLDP-MED, and Wired Location Service
Purpose
Specify the network-policy TLV.
Return to privileged EXEC mode.
Verify the configuration.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the location information for an endpoint.
admin-tag—Specify an administrative tag or site information.
civic-location—Specify civic location information.
elin-location—Specify emergency location information (ELIN).
identifier id—Specify the ID for the civic location.
string—Specify the site or location information in alphanumeric
format.
Return to global configuration mode.
Specify the interface on which you are configuring the location
information, and enter interface configuration mode.
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
28-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst3560-e

Table of Contents