Table of Contents
Advertisement
Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the I/O board on the computer base.
2
Align the screw holes on the I/O board with the screw holes on the computer
base.
3
Replace the screw that secures the I/O board to the computer base.
4
Connect the power and volume-buttons board cable to the I/O board.
5
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
coin-cell
2
Replace the
wireless
3
Follow the procedure from step 4 to step 7 in
4
Replace the battery.
5
Replace the
base
computer. After working inside your computer, follow
After working inside your
battery.
card.
cover.
computer. For more safety best
www.dell.com/
"Replacing the hard
Before
drive".
63
Advertisement
Table of Contents
