Replacing the full-length
graphics cards
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the full-length graphics card with the slot on the system board.
2
Place the card into the slot and press down firmly until the full-length graphics
card snaps into place.
3
Connect the power cables to the full-length graphics card.
4
Slide the tab on the full-length graphics-card bracket into the slot on the chassis
and snap it into place.
Post-requisites
1
Follow the procedure from step 9 to step 10 in
unit".
2
Replace the
right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the power-supply
Before
71