Removing The Processor Fan And Heat-Sink Assembly - Dell XPS 8930 Service Manual
Hide thumbs
Also See for XPS 8930:
- Setup and specifications (29 pages) ,
- Service manual (111 pages) ,
- Setup and speci?cations (13 pages)
Table of Contents
Advertisement
Removing the processor fan and
heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
WARNING: The heat sink may become hot during normal operation. Allow
sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat
transfer areas on the heat sink. The oils in your skin can reduce the heat
transfer capability of the thermal grease.
Prerequisites
1
Remove the
right-side
2
Follow the procedure from step 1 to step 2 in
Procedure
1
Disconnect the processor-fan cable from the system board.
For more information, see
2
In a non-adjacent sequence as indicated in the figure below, loosen the captive
screws that secure the processor fan and heat-sink assembly to the system
board.
computer. After working inside your computer, follow
After working inside your
cover.
"System-board
computer. For more safety best
"Removing the power-supply
components".
Before
www.dell.com/
unit".
93
Hide quick links:
Advertisement
Table of Contents
