hit counter script

Areas - Cisco Nexus 3000 Series Configuration Manual

Nx-os unicast routing configuration guide, nx-os release 5.0(3)u1(1)
Hide thumbs Also See for Nexus 3000 Series:
Table of Contents

Advertisement

Information About OSPFv2
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
All other routers establish adjacency with the DR and the BDR and use the IPv4 multicast address
224.0.0.6 to send LSA updates to the DR and BDR.
between all routers and the DR.
DRs are based on a router interface. A router might be the DR for one network and not for another
network on a different interface.
Figure 3-1

Areas

You can limit the CPU and memory requirements that OSPFv2 puts on the routers by dividing an
OSPFv2 network into areas. An area is a logical division of routers and links within an OSPFv2 domain
that creates separate subdomains. LSA flooding is contained within an area, and the link-state database
is limited to links within the area. You can assign an area ID to the interfaces within the defined area.
The Area ID is a 32-bit value that you can enter as a number or in dotted decimal notation, such as
10.2.3.1.
Cisco NX-OS always displays the area in dotted decimal notation.
If you define more than one area in an OSPFv2 network, you must also define the backbone area, which
has the reserved area ID of 0. If you have more than one area, then one or more routers become
border routers
(see
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
3-4
DR in Multi-Access Network
Router A
Router D
or DR
= Multi-access network
= Logical connectivity to Designated Router for OSPF
(ABRs). An ABR connects to both the backbone area and at least one other defined area
Figure
3-2).
Figure 3-1
shows this adjacency relationship
Router B
Router E
Chapter 3
Configuring OSPFv2
Router C
area

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF