Defining Mstp Interface Settings - Cisco SF 300-08 Administration Manual
Cisco small business 300 series managed switch
Hide thumbs
Also See for SF 300-08:
- Quick start manual (72 pages) ,
- Datasheet (14 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Configuring the Spanning Tree Protocol
Defining MSTP Interface Settings
STEP 3
Defining MSTP Interface Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business 300 Series Managed Switch Administration Guide
•
Bridge ID—Displays the bridge priority and the MAC address of this switch
for the selected instance.
•
Remaining Hops—Displays the number of hops remaining to the next
destination.
Click Apply. The MST Instance configuration is defined, and the switch is updated.
MSTP Interface Settings Page
The
settings for every MST instance, and to view information that has currently been
learned by the protocol, such as the designated bridge per MST instance.
To configure the ports in an MST instance:
Click Spanning Tree > MSTP Interface Settings. The
Page
displays.
Enter the parameters.
•
Instance equals To—Select the MSTP instance to be configured.
•
Interface Type equals to—Select whether to display the list of ports or
LAGs.
The MSTP parameters for the interfaces on the instance are displayed.
Select an interface, and click Edit. The Edit Interface Settings Page displays.
Enter the parameters.
•
Instance ID—Select the MST instance to be configured.
•
Interface—Select the interface for which the MSTI settings are to be
defined.
•
Interface Priority—Set the port priority for the specified interface. and MST
instance.
•
Path Cost—Set the port contribution to the root path cost or use the default
value. The root path cost is the cost of the switch to the Root Bridge of the
specified MST instance.
enables you to configure the port MSTP
MSTP Interface Settings
12
138
Hide quick links:
Advertisement
Table of Contents
