Monitoring Rate Limits; Clearing The Rate Limit Statistics - Cisco Nexus 9000 Series Configuration Manual
Nx-os security configuration guide, release 9.x
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (276 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Configuring Rate Limits
Command or Action
Step 7
hardware rate-limiter layer-3 multicast local-groups
packets [module module [port start end]]
Example:
switch(config)# hardware rate-limiter layer-3
multicast local-groups 300
Step 8
hardware rate-limiter span-egress rate [module module]
Example:
switch(config)# hardware rate-limiter span-egress
123
Step 9
(Optional) show hardware rate-limiter [ access-list-log
| bfd |exception | fex | layer-3 glean | layer-3 multicast
local-groups | span-egress |module module]
Example:
switch# show hardware rate-limiter
Step 10
(Optional) copy running-config startup-config
Example:
switch# copy running-config startup-config
Monitoring Rate Limits
You can monitor rate limits.
SUMMARY STEPS
1. show hardware rate-limiter [access-list-log | bfd | exception | fex | layer-3 glean | layer-3 multicast
local-groups | span-egress | module module]
DETAILED STEPS
Command or Action
Step 1
show hardware rate-limiter [access-list-log | bfd |
exception | fex | layer-3 glean | layer-3 multicast
local-groups | span-egress | module module]
Example:
switch# show hardware rate-limiter access-list-log
Clearing the Rate Limit Statistics
You can clear the rate limit statistics.
Purpose
Configures rate limits in packets per second for Layer 3
multicast data packets that are punted for initiating a
shortest-path tree (SPT) join. The range is from 0 to 10000.
Configures rate limits in kilobits per second for SPAN for
egress traffic. The range is from 0 to 100000000.
Note
Displays the rate limit configuration. The module range is
from 1 to 30.
Copies the running configuration to the startup
configuration.
Purpose
Displays the rate limit statistics.
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Monitoring Rate Limits
You should not configure both sFlow and the
SPAN egress rate-limiter.
497
- Quick Links:
- Radius and Tacacs+ Security Protocols
Hide quick links:
Advertisement
Table of Contents
