Sealey Auto Service Series Instructions
Smoke diagnostic tool-leak detector
Hide thumbs
Also See for Auto Service Series:
- Manual (38 pages) ,
- Instructions manual (21 pages) ,
- Instructions (2 pages)
Advertisement
Quick Links
thank you for purchasing a sealey product. manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLease reaD tHese instructions carefuLLy. note tHe safe oPerationaL reQuireMents,
WarninGs anD cautions. use tHis ProDuct correctLy, anD WitH care for tHe PurPose for WHicH it is
intenDeD. faiLure to Do so May cause DaMaGe anD/or PersonaL inJury anD WiLL invaLiDate tHe
Warranty.
1. safety instructions
1.1.
PersonaL Precautions
Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye
immediately with cool, clean running water for at least 15 minutes and seek immediate medical attention.
remove personal metallic items such as rings, bracelets, necklaces and watches.
A lead-acid battery can pr oduce a short-ci rcui t c urrent w hi c h is high enough
to w el d su ch item s to the vehi cle and cause severe burns.
Do not smoke or allow a spark or flame in the vicinity of the battery or engine.
WarninG! to prevent the risk of sparking, short circuit and possible explosion. Do not drop metal tools in
the battery area, or allow them to touch the battery terminals.
Do not cross-connect unit to battery. ensure positive (red) clamp is to positive terminal and negative
(BlAcK) clamp is to negative terminal.
1.2.
GeneraL safety.
WarninG! ensure Health and safety, local authority and general workshop practice regulations are
adhered to when using this unit.
maintain this product in good working order and condition, take immediate action to repair or replace damaged
parts.
use approved parts only. unapproved parts may be dangerous and will invalidate the warranty.
Do not use to perform a task for which it is not designed.
Do not allow untrained persons to use the unit.
Do not use when tired or under the influence of drugs, alcohol or intoxicating medication.
avoiD direct inhalation of smoke.
WarninG! Do not pollute the environment by allowing uncontrolled discharge of fluids.
Keep children and unauthorised persons away from the work area.
Keep work area clean and tidy and free from unrelated materials.
ensure the work area has adequate lighting.
Wear suitable clothing to avoid snagging. do not wear jewellery, and tie back long hair. A full range of
personal safety equipment is available from your sealey dealer.
WarninG! unit may get Hot!
Power supply: 12V dc.
maximum input pressure: 14psi (1bar).
use mineral oil (baby oil) onLy.
do not remove filler cap when unit is on.
Keep unit upright at all times to avoid oil leaking out.
When not in use, clean unit and store in a safe, dry, childproof location.
© Jack sealey ltd
instructions for:
sMoKe DiaGnostic tooL
- LeaK Detector
n o
model
Original Language Version
vs870
:
Vs870
issue: 1 -02/11/12
Advertisement
Related Manuals for Sealey Auto Service Series
Summary of Contents for Sealey Auto Service Series
- Page 1 IMPORTANT: PLease reaD tHese instructions carefuLLy. note tHe safe oPerationaL reQuireMents, WarninGs anD cautions.
- Page 2 3.13 if the smoke starts to dwindle, the heater element will need to be switched on for a further time. Original Language Version © Jack sealey ltd Vs870 issue: 1 -02/11/12...
- Page 3 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.