Sealey Auto Service Series Instructions

Paint thickness gauge

Hide thumbs Also See for Auto Service Series:

Download this manual

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

1.1. GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations

are adhered to when using this gauge in workshop or bodyshop environments.

 Take extra care if the vehicle is jacked up or on a raised ramp/hoist.

 Maintain correct balance and footing at all times. Ensure floor/road surface is not slippery and

wear non-slip shoes.

 If the vehicle is parked on a road, observe normal pedestrian precautions before working in the

road, especially on the offside of the vehicle.

 DO NOT use when you are tired, under the influence of alcohol, drugs or intoxicating medication.

2. INTRODUCTION & SPECIFICATIONS

For the professional bodyshop or valeting bay to accurately verify the thickness of paint and check

for accident damage. Uses magnetic induction to provide accurate and consistent readings to

0.1mm. Suitable for iron, steel and aluminium with non-magnetic coatings including paint, enamel,

plastic and epoxy. Displays measurement in mm or mil. Powered by CR2032 3V battery (supplied).

Model ................................................................ TA091

Accuracy: ................................................................±2%

Graduations: ....................................................... 0.1mm

INSTRUCTIONS FOR:

Paint Thickness Gauge

MODEL No:

Range: ................................................................0-2mm

Original Language Version

TA091

Issue No.1 09/09/13

Page 1 TA091 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &...
Page 2 BATTERY DISPOSAL / REPLACEMENT INFORMATION See Section 4 regarding battery access/ replacement. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705 Environmental Protection.

Ta091