Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DGA900Z
Summary of Contents for Makita DGA900Z
- Page 1 INSTRUCTION MANUAL Cordless Angle Grinder DGA700 DGA900 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DGA700 DGA900 Wheel diameter 180mm 230mm Max. wheel thickness 7.2mm 6.5mm Spindle thread M14 or M16 or 5/8″ (country specific) Rated speed (n) 7,800min 6,000min Overall length 499mm Rated voltage D.C.36 V Battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840, BL1840B, BL1850, BL1850B, BL1860B Net weight 5.0 - 6.0 kg... -
Page 3: Ec Declaration Of Conformity
Do not abuse the cord. Never use the cord for WARNING: The vibration emission during actual carrying, pulling or unplugging the power tool. use of the power tool can differ from the declared Keep cord away from heat, oil, sharp edges emission value depending on the ways in which the or moving parts. - Page 4 Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
- Page 5 Threaded mounting of accessories must match For example, if an abrasive wheel is snagged or the grinder spindle thread. For accessories pinched by the workpiece, the edge of the wheel that is mounted by flanges, the arbour hole of the entering into the pinch point can dig into the surface of accessory must fit the locating diameter of the the material causing the wheel to climb out or kick out.
- Page 6 Additional Safety Warnings Specific for Abrasive Make sure the wheel is not contacting the Cutting-Off Operations: workpiece before the switch is turned on. Do not “jam“ the cut-off wheel or apply exces- Before using the tool on an actual workpiece, sive pressure.
-
Page 7: Functional Description
If you can see the red indicator on the causing fires, personal injury and damage. It will upper side of the button, it is not locked completely. also void the Makita warranty for the Makita tool and charger. CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. -
Page 8: Overload Protection
Indicating the remaining battery capacity Only for battery cartridges with the indicator ► 1. Battery indicator Overload protection When the tool is operated in a manner that causes it to draw an abnormally high current, the tool automatically ► 1. Indicator lamps 2. Check button stops without any indication. - Page 9 Shaft lock Automatic speed change function Press the shaft lock to prevent spindle rotation when installing or removing accessories. ► 1. Mode indicator ► 1. Shaft lock Mode indicator status Operation mode NOTICE: Never actuate the shaft lock when the High speed mode spindle is moving.
- Page 10 ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing side grip (handle) CAUTION: Always be sure that the side grip is installed securely before operation. Screw the side grip securely on the position of the tool as shown in the figure.
- Page 11 ► 1. Wheel guard ► 1. Lock nut 2. Depressed center wheel 3. Inner flange 4. Mounting part Close the lever in direction of the arrow. Then tighten the wheel guard with fastening the nut. Be sure to To tighten the lock nut, press the shaft lock firmly so tighten the nut securely.
-
Page 12: Operation
Installing or removing abrasive disc Grinding and sanding operation Optional accessory 15° Turn the tool on and then apply the wheel or disc to the ► 1. Sanding lock nut 2. Abrasive disc 3. Rubber pad workpiece. In general, keep the edge of the wheel or disc at an Mount the rubber pad onto the spindle. - Page 13 ► 1. Lock nut 2. Abrasive cut-off wheel / diamond ► 1. Wire cup brush wheel 3. Inner flange 4. Wheel guard for abrasive cut-off wheel / diamond wheel Remove the battery cartridge and place the tool upside down allowing easy access to spindle. For Australia and New Zealand Remove any accessories on spindle.
-
Page 14: Maintenance
► 1. Battery guard 2. Battery guard holder To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 14 ENGLISH... -
Page 15: Optional Accessories
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. •... - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885578-228 www.makita.com 20170508...