Canon imageFORMULA DR-G2140 Service Manual page 126
Hide thumbs
Also See for imageFORMULA DR-G2140:
- User manual (182 pages) ,
- Service manual (25 pages) ,
- User manual (161 pages)
Table of Contents
Advertisement
CHAPTER 4 INSTALLATION & MAINTENANCE
No.
8
Insert the lock of the cable band
the hole of the cover, and connect the ca-
ble to the connector
PCB.
9
Check that the IP carriage can move from
side to side.
On the base frame, there are small round
dents
1
. A projection in the bottom of the
IP carriage is set in this dent to stop the
position the IP carriage.
Note:
1) The cable should not hang the IP car-
riage.
10 Install the eject try unit and right and left
covers.
Note:
1) The eject try unit should be installed
with the imprinter cover opened.
11 Stick the caution label
on the inside of imprinter cover. And
2
stick the 2 stoppers
in figure.
Note:
1) The labels should be set as seeing
from the front of the main body.
2) The stoppers need to stick for the DR-
G2140 series, not for the DR-G1130
series.
3) The stoppers should be block on the
5th and 9th grooves from the left side.
These grooves could not use to stop.
4) The stoppers should be stick over the
groove and touch the extrusion wall of
the imprinter cover.
4-10
Step
into
1
on the main drive
2
and IP label
1
on each location
3
COPYRIGHT © CANON ELECTRONICS INC. 2018
Details/Remarks
CANON DR-G2140/G2110/G2090 FIRST EDITION
- Quick Links:
- Table of Contents
- Name of Parts
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
