4. Pickup Motor
1) Remove the pickup unit.
(Page 3-10)
2) Go through the tool
then remove 2 screws
round tip) and remove the pickup motor
Note: Do not make any damage on the belt
by the tool.
Figure 3-406
Figure 3-407
COPYRIGHT © CANON ELECTRONICS INC. 2018
1
from opposite side,
2
(M3-bind head,
3
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
5. Pickup Up/Down Motor
1) Remove the pickup unit.
(Page 3-10).
2) Remove 2 screws
and remove the motor unit
.
mounting plate) .
4
3) Remove 2 screws
round tip), and remove the pickup up/down
motor
.
2
1
(M3, self-tapping),
2
(including
Figure 3-408
(M3,-bind head,
1
Figure 3-409
3-23