Table of Contents
Advertisement
Installing the battery
Steps
1. Insert the battery into the slot on the system.
2. Replace the 3 (M2x3) screws that secure the battery to the system.
3. Route the battery cable and connect the cable to the connector on the system board.
4. Affix the 2 adhesive tap to secure the cable to the system board.
5. Place the 2 metal brackets to secure the battery cable to its connector on the system board and the battery.
6. Replace the 2 (M2x3) screws, one on each metal bracket, to secure each bracket to the system.
7. Install the:
a.
base cover
b.
microSD card
8. Follow the procedure in
Speaker
Removing speaker
Steps
1. Follow the procedure in
2. Remove the:
a.
microSD card
b.
base cover
c.
battery
3. To remove the speaker:
a. Disconnect the speaker cable from the connector on the system board [1].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
15
Advertisement
Table of Contents
