Table of Contents
Advertisement
Product Overview
Table 9: PoE LED
Color
Off
Green
Blinking amber
XPS LED
Note
Table 10: XPS LED
Color
Off
Green
Blinking green
Amber
Blinking amber
For information about the XPS 2200, see the Cisco eXpandable Power System 2200 Hardware Installation
Guide on Cisco.com:
http://www.cisco.com/go/xps2200_hw
S-PWR LED
Table 11: S-PWR LED
Color
Off
Green
Blinking green
Description
PoE mode is not selected. None of the 10/100/1000 ports have been denied power
or are in a fault condition.
PoE mode is selected, and the port LEDs show the PoE mode status.
PoE mode is not selected. At least one of the 10/100/1000 ports has been denied
power, or at least one of the 10/100/1000 ports has a PoE mode fault.
This LED is not supported on Cisco Catalyst 9300L Series switches.
Description
XPS cable is not installed.
Switch is in StackPower mode.
XPS is connected and ready to provide back-up power.
XPS is connected but is unavailable because it is providing power to another device
(redundancy has been allocated to a neighboring device).
The XPS is in standby mode or in a fault condition. See the XPS 2200
documentation for information about the standby mode and fault conditions.
The power supply in a switch has failed, and the XPS is providing power to that
switch (redundancy has been allocated to this device).
Description
StackPower cable is not connected, or the switch is in standalone mode.
Each StackPower port is connected to another switch.
This appears on the switch in a StackPower ring configuration that detects an open
ring or has only one StackPower cable connected.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
XPS LED
17
- Quick Links:
- Front Panel Components
- 10/100/1000 Ports
Hide quick links:
Advertisement
Table of Contents
