M.2 Solid-State Drive, Bracket And Thermal Pad - Lenovo ThinkPad P16v Gen 2 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkPad P16v Gen 2:
- User manual (86 pages) ,
- Manual (14 pages) ,
- Setup manual (12 pages)
Table of Contents
Advertisement
Note: Memory module replacement might cause memory retraining during POST. When memory retraining
occurs, the screen might be blank. You might see the LED indicators on Esc, F1, and F4 blinking sequentially
to indicate the progress. Do not press the power button to interrupt the process. Wait a few minutes until the
logo screen is displayed.
M.2 solid-state drive, bracket and thermal pad
Follow the instructions to replace the M.2 solid-state drive, bracket and thermal pad.
Before you start, read
Generic Safety and Compliance Notices
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
and print the following instructions.
.
Chapter 9
Removing or replacing a FRU
69
Advertisement
Table of Contents
