free stats
Download Print this page
Sealey SV20 Series Quick Start Manual
Sealey SV20 Series Quick Start Manual

Sealey SV20 Series Quick Start Manual

40v blower body only
Hide thumbs Also See for SV20 Series:

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1.
SAFETY
1.1.
GENERAL SAFETY
DO NOT allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people
8
unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator.
DO NOT operate the machine while people, especially children, or pets are nearby.
8
DO NOT overreach whilst using the machine, and keep balance at all times.
8
Always be sure of your footing on slopes and when walking with the machine. Never run.
9
Always wear substantial footwear and long trousers while operating the machine.
9
Never operate the machine with a defective guard or shield, or without safety devices
8
Avoid using the machine in bad weather conditions, especially when there is a risk of lightning.
8
Use hearing protection during use.
9
Different types of batteries or new and used batteries are not to be mixed.
9
Batteries are to be inserted with the correct polarity.
9
1.2.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
9
1.3.
ELECTRICAL SAFETY
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of
9
electric shock if your body is earthed or grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
Power tools can produce electromagnetic fields (EMF) that are not harmful to the user. However, users of pacemakers and other similar
9
medical devices should contact the maker of their device and/ or doctor for advice before operating this power tool.
1.4.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool.
9
DO NOT use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while
8
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes,
9
hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or
9
carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power
9
tool may result in personal injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
8
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes,
9
jewellery or long hair can be caught in moving parts.
DO NOT let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless
8
action can cause severe injury within a fraction of a second.
Always wear protective goggles to protect your eyes from injury when using power tools. The goggles must comply with local
9
regulations in force.
It is an employer's responsibility to enforce the use of appropriate safety protective equipment by the tool operators and by other
9
persons in the immediate working area.
1.5.
POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at
8
the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired.
Remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power
9
tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
9
operate the power tool. Power tools are dangerous in the hands of untrained users.
© Jack Sealey Limited
40V SV20 SERIES BLOWER BODY ONLY
CP40VB
MODEL NO:
Wear ear
DO NOT
protection
expose to rain
Original Language Version
WARNING!
Keep bystanders
Thrown objects.
away.
CP40VB
Issue 3 (6)
22/05/24

Advertisement

loading

Summary of Contents for Sealey SV20 Series

  • Page 1 CP40VB MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
  • Page 2 DO NOT not to block suction inlet or blower outlet with dust or dirt when operating in dusty areas. DO NOT use nozzles other than the nozzles provided by Sealey. DO NOT use the blower to inflate balls, rubber boat or the similar.
  • Page 3 When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local regulations relating to disposal of battery. Use the batteries only with the products specified by Sealey. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte.
  • Page 4 Part of the SV20 Series designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort. Operates using 2 x 20V batteries from the Sealey SV20 Series (batteries must be of the same Ah rating).
  • Page 5 6.7.2. Depress down the switch lock-on button. 6.7.3. Release the switch trigger. 6.7.4. Release the switch lock-on button. 6.8. TO DISENGAGE THE LOCK (FIG.6) 6.8.1. Depress the switch trigger again and release. CP40VB Issue 3 (6) 22/05/24 Original Language Version © Jack Sealey Limited...
  • Page 6 Stop the machine immediately! for repair. Motor cannot stop: Electric or electronic malfunction. Remove the battery and ask your local Remove the battery immediately! authorized service centre for repair. CP40VB Issue 3 (6) 22/05/24 Original Language Version © Jack Sealey Limited...
  • Page 7 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

This manual is also suitable for:

Cp40vb