Table of Contents
Advertisement
NOTE:
The display cable removal procedure is applicable only for Latitude 5350 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display
hinges.
7. Remove the
display
panel.
About this task
The following images indicate the location of the display cable and provide a visual representation of the removal procedure.
Figure 80. Removing the display cable (laptop)
Steps
1. Peel off the conductive tape that secures the camera cable in place.
2. Open the latch and disconnect the camera cable from the connector on the camera module.
3. Peel the tape that secures the display cable to the display back cover.
4. Remove the display cable from the display back cover.
Installing the display cable (laptop)
About this task
CAUTION:
The information in this installation section is intended for authorized service technicians only.
NOTE:
The display cable installation procedure is applicable only for Latitude 5350 laptop and not for the 2-in-1
configuration.
The following images indicate the location of the display cable and provide a visual representation of the installation procedure.
112
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
computer.
Advertisement
Table of Contents
