Dell PowerEdge T410 Hardware Owner's Manual page 36
Dell server hardware owner's manual
Hide thumbs
Also See for PowerEdge T410:
- Getting started with (63 pages) ,
- Technical manual (57 pages) ,
- Technical manualbook (56 pages)
Table of Contents
Advertisement
Table 1-2. LCD Status Messages (continued)
Code
Text
E2010
Memory not
detected.
Inspect DIMMs.
E2011
Memory
configuration
failure. Check
DIMMs.
E2012
Memory
configured but
unusable.
Check DIMMs.
E2013
BIOS unable to
shadow memory.
Check DIMMs.
E2014
CMOS RAM
failure. Power
cycle AC.
E2015
DMA Controller
failure. Power
cycle AC.
E2016
Interrupt
Controller
failure. Power
cycle AC.
36
About Your System
Causes
No memory was detected
in the system.
Memory detected, but is
not configurable. Error
detected during memory
configuration.
Memory configured, but is
unusable.
The system BIOS failed to
copy its flash image into
memory.
CMOS failure. CMOS
RAM not functioning
properly.
DMA controller failure.
Interrupt controller
failure.
Corrective Actions
Install or reseat memory
modules. See "Installing
Memory Modules" on
page 110 or
"Troubleshooting System
Memory" on page 162.
See "Troubleshooting
System Memory" on
page 162.
See "Troubleshooting
System Memory" on
page 162.
See "Troubleshooting
System Memory" on
page 162.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
Advertisement
Table of Contents
Troubleshooting
