Brother HL-1660e Series User Manual page 158

Service manual

Hide thumbs Also See for HL-1660e Series:

1. Open the multi-purpose tray by pressing the front door of the tray

lightly and lowering it gently.

Pull out the extension tray of the multi-purpose tray for long paper if it is

Fig. 2-19 Opening the Multi-purpose Tray

and Pulling Out the Extension Tray

2. Lift up and slide the paper width guide to the far right side.

3. Place a stack of paper or envelopes on the tray until it is securely

When you place paper on the multi-purpose tray, note the following:

The print surface must be face up.

The leading edge must be placed inside first and lightly against the

The left side must be aligned with the left guide.

The top of the paper stack must be under the holders on both sides of

the tray. The maximum thickness is 16.5 mm or 0.65 inches.

CHAPTER 2 GETTING STARTED

Chapters

Hl-1660 series