Brother HL-1660e Series User Manual page 213
Service manual
Hide thumbs
Also See for HL-1660e Series:
- User manual (258 pages) ,
- Parts reference list (25 pages) ,
- Technical reference manual (517 pages)
Advertisement
Display Message
RESOLUTION=600
RESOLUTION=300
Select the print resolution in this mode according to the resolution
required for your print jobs as shown below:
Resolution Setting in Resolution Mode
Print Jobs
300 dpi
300 dpi
For optimum print quality For mixing 300 dpi bitmaps
600 dpi
Not recommended
Note
Even if you set the resolution to 600 dpi in this mode, the printer may not
be able to print large files at 600 dpi because of insufficient memory.
However, it automatically decreases the resolution to 300 dpi to print
them. While the printer is printing, the display prompts "01 PR300 ... ."
If the printer cannot print files even at 300 dpi, the "MEMORY FULL"
error occurs. See
"TROUBLESHOOTING" in Chapter
This automatic resolution decrease function works in the BR-Script 2
mode and other emulation modes with the page protection on. See also
"PAGE PROTECTION" in this chapter.
When you want to print without decreasing the resolution, you must
expand the memory capacity of the printer to 6-Mbytes or more.
Expand the memory capacity referring to the table below. It shows the
minimum size of memory required in the BR-Script 2 mode.
Paper Size
Letter or A4
Legal
(Duplex printing)
For memory expansion, see
the dealer where you purchased the printer.
Resolution
Set the resolution to 600 dpi. (Factory
setting)
Set the resolution to 300 dpi.
600 dpi
with 600 dpi
For optimum print quality
300 dpi
600 dpi
4 Mbytes
6 Mbytes
4 Mbytes
6 Mbytes
4 Mbytes
10 Mbytes
"RAM EXPANSION" in Chapter 5
CHAPTER 4 CONTROL PANEL
7.
or consult
4–29
Advertisement
Chapters
Troubleshooting
