Settings On The Control Panel - Brother HL-1660e Series User Manual
Service manual
Hide thumbs
Also See for HL-1660e Series:
- User manual (258 pages) ,
- Parts reference list (25 pages) ,
- Technical reference manual (517 pages)
Advertisement
OPERATION MANUAL
Settings on the Control Panel
You can make some settings for the fax functions on the printer control panel as in the
following steps;
1. Press the SEL switch to make the printer off-line.
2. Press the MODE switch to enter the Mode Menu. Then, 'INTERFACE MODE' is
displayed first.
3. Press the
4. Press the SET switch.
5. Press the
6. Press the SET switch.
Note:
'FAX MODE' is not displayed when 'FAX MODEM=OFF' is selected in the 'HIDDEN
PANEL' menu. Refer to the previous section,
You can now make the following settings;
Menu
RING DELAY
REDUCTION
FAX RAM
SIZE
RECEIVE
INTERVAL
or
switch until 'ADVANCED MODE' is displayed.
or
switch until 'FAX MODE' is displayed.
Descriptions
Number of rings before the printer answers when receiving fax
data.
Select from 0 to 4. The factory default setting is 2.
Set if the received fax data is reduced for printing or not.
AUTO: reduced automatically (factory default setting)
OFF: not reduced automatically
90%: reduced to 90%
Set the RAM size used for the fax function.
After turning the printer off and on the setting is active.
The factory setting is 1MB.
The maximum size that can be set is 15 MB, this depends on the
memory size installed into the printer.
Select if the printer is to receive fax data or not.
When the printer only sends Fax data, select this to OFF.
ON: Receive fax data (factory default setting)
OFF: Does not receive fax data
Set the interval to print a fax sent / received report. The factory
setting is OFF.
Select one of the following 7 types.
OFF: No printing
6H:
every 6 hours
12H: every 12 hours
24H: every 24 hours
2D:
every 2 days
4D:
every 4 days
7D:
every 7 days
'Installing the External Fax
-6-
Modem'.
Advertisement
Chapters
Troubleshooting
