NEC 4650NX - SuperScript Color Laser Printer Quick Start

Internet printer series

Hide thumbs Also See for 4650NX - SuperScript Color Laser Printer:

User manual (137 pages)

Quick start (1 page)

Network manual (74 pages)

page of 1

/ 1
Bookmarks

Quick Links

Download this manual See also: User Manual, Network Manual

NEC0

UNPACKING THE PRINTER

Open the top of the packing box.

emove the Accessory kit and the

Starter kit.

IMPORTANT!

Pick the location for your

printer carefully. Make sure it has good

ventilation and that the surface is level. For

more information see Chapter 2 of the

SuperScript 4650 Series User's Guide.

VERIFYING THE BOX CONTENTS

4650 Series Printer

Starter Kit

Includes a standard 250-sheet

Paper Tray 1 and a power cord.

•

NEC Paper Sample Pack

•

Software Envelope

•

SuperScript 4650 Series CD

•

SuperScript 4650 Series User's Guide

•

SuperScript Color Laser Network

Guide (4650N or 4650NX only)

ADDING THE PAPER TRAY 2 UNIT (4650NX ONLY)

R emove the Paper Tray 2 Unit from its

packaging.

NOTE:

Paper Tray 2

will increase the

printer's height by

4 inches.

F acing the back of

the printer, locate

the Connector

Cable at the rear of

the Paper Tray 2

Unit. Make sure

the cable is

extending past the

INSTALLING THE BELT CARTRIDGE

Open the F ront Cover using the

Open the Top Cover by sliding

Front Cover Release Latch.

the Top Cover Release Button

forward.

INSTALLING THE FUSER OIL BOTTLE & CLEANING ROLLER

P ush the Fuser Roller Release

Mak e sure the Lock Tabs are in

Tabs backward and pull out the

the open position.

orange Tension Release Pins.

WARNING!

result if fuser oil accidently spills inside the

printer.

INSTALLING THE TONER MODULES

The color labels inside the front of the

printer indicate where to place each of

the color Toner Modules.

LOADING LETTER PAPER

Remove Paper Tray 1.

PRINTING A STARTUP PAGE

Connect the Power

Cord to the back of

the printer.

T urn the large plastic box screws at the bottom of the

box to the left (A) and pull out to remove (B).

Using your thumb and finger

, remove the plastic

screw sleeves from the box (C).

Accessory Kit

Belt Cartridge

Fuser Oil Bottle

L ocate the packet of brackets and thumb

screws and set aside. Extend the

Connector Cable away from the unit.

Connector Cable

Screw Hole

R emove the Cable

Connector Doors from

both the printer and the

Paper Tray 2 Unit. Set the

doors aside.

Flip up the Belt Car tridge

Locking Levers inside the top of

the printer.

R emove the Fuser Oil Bottle

from its plastic bag and set into

place with the shunt valve down

and the labeled side facing the

front.

Damage to internal parts may

Keep printer level at all times.

Begin with the Cyan Toner Module.

emove from its plastic bag and rock

gently three or four times.

emove the tape from the Module.

emove (but

save) the packing

face plate.

Squeeze on both sides of the length tab

and slide it into place. The outside of the

tab should match letter size (LTR) marked

on the inside of the tray.

Turn on the Power button located on the

lower left front corner of the printer.

4 6 5 0

Lif t off the outer box. Open the

plastic bag that contains the

printer and slide it down. Do not

attempt to lift the printer by its

plastic bag!

1 Black Toner Module

1 Cyan Toner Module

1 Magenta Toner Module

1 Yellow Toner Module

Fuser Cleaning Roller

Fuser Oil Syringe

(save for future use)

S et the Paper Tray 2 Unit next to the

printer. Carefully align the Paper Tray 2

Unit to the printer.

eeping the printer

level, have two

people lift the printer

up and onto the

Paper Tray 2 Unit.

Plug the P aper Tray 2 unit

Connector Cable into the

printer socket.

R emove the Tension Release

Pins and the black protective

sheet from the Belt Cartridge.

Be careful not to scratch the

shiny green surface.

R emove the Fuser Cleaning

Roller from its plastic bag. Place

in printer top with the exposed

part of the roller facing the

front.

Hold the module level and slide into

place along the racks in the printer.

Squeeze the left side guide and

slide it to match your paper's

width. The inside of the tab

should match the desired size

on the tray.

Indicator lights cycle

and messages

appear on the

Operator Panel.

Power

Warning

Online

OnLine

Data

OHT

Label

Feed

Item

Media

Select

4 6 5 0 N

Q U I C K S TA R T

With one per son on each side of the printer, grasp the

printer at the hand grips where they are exposed by

notches in the foam padding. Place on a sturdy level

desk or table.

Paper Tray 2 Unit

(Additional 250-sheet paper tray

included only with the 4650NX)

L ocate the metal tab with screw hole on

each side of the Paper Tray 2 Unit.

Take a metal bracket

from the packet and

hold it at a slight

angle away from

you. Slide the bracket

up into the hole

beneath the printer.

S witch the two Cable

Connector Doors. Place

the small door on the

printer and the large

door on the Paper Tray 2

Unit.

Slide the Belt Car tridge into the

guides.

Do not force it!

The flat side

of the Belt

Cartridge

faces front.

T urn the Lock Tabs to the locked

position.

Repeat steps 2 and 3 for the remaining

Toner Modules.

Fill the paper tray.

Do not overfill paper tray!

NOTE:

Load and print only regular paper

(16 to 24 lb.) until you read Chapter 2 of

your User's Guide. Other media must be

selected on the Operator Panel.

A Startup Page

prints and

READY

GENERAL INFO

appears on the

Printer Name: SuperScript 4650N

Software Version: 0.04

Build Time: 936928632

PostScript Version: 3010.108

PrintAgent Version: 1.008

Disk Resource Version: 0.0.4N

Operator Panel.

STORAGE

RAM Installed: 128 Megabytes

Disk Size: 1964.03 Megabytes

Disk Free: 1667.97 Megabytes

JOB OPTIONS

Number of Copies: 1

Print PS Errors: Enabled

Wait Timeout: 240 seconds

Job Timeout: Never

ENGINE INFO

Default Resolution: 600.0 X 600.0 DPI

Edge Smoothing: Disabled

Jam Recovery: Enabled

Tray 1: Letter

Tray 2: Legal

Pages Printed: 2182

PARALLEL PORT

Status: Enabled

Bi-di: Enabled

Personality: AutoSelect

NETWORK PORT

Status: Enabled

Personality: AutoSelect

Web Address: http://131.241.45.88

For sales information, call (800) NEC-INFO or visit our website at http://www.nectech.com. For supplies, call (800) 632-2326

and may be registered in certain jurisdictions. All other trademarks and registered trademarks are the property of their respective owners.

©1999 NEC Technologies, Inc. All rights reserved. NEC and the NEC logo are registered trademarks and SuperScript is a trademark of NEC Corporation. Adobe, PostScript and the PostScript logo are trademarks of Adobe Systems Incorporated or its subsidiaries

4 6 5 0 N X

The printer and packaging

weighs approximately 100

lbs. To set up the printer and

move it requires two adults.

Not included ...

To connect your printer, you need to

provide the proper parallel and/or

network cable.

IEEE 1284

Bidirectional Parallel Cable

Category 5 Twisted Pair Cable