Table of Contents
Advertisement
Monitoring the AP Crash Log Information
Command or Action
Step 4
end
Example:
Switch(config)# end
Step 5
ap name Cisco_AP reset-button
Example:
Switch# ap name AP02 reset-button
Monitoring the AP Crash Log Information
Note
The procedure to perform this task using the switch GUI is not currently available.
SUMMARY STEPS
1. enable
2. show ap crash-file
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch# enable
Step 2
show ap crash-file
Example:
Switch# show ap crash-file
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
60
Converting Autonomous Access Points to Lightweight Mode
Purpose
Returns to privileged EXEC mode. Alternatively, you can also
press Ctrl-Z to exit global configuration mode.
Enables the Reset button on the converted access point that you
specify.
Purpose
Enters privileged EXEC mode.
Verifies whether the crash file is downloaded to the
switch.
OL-28697-01
Advertisement
Table of Contents
