Configuring Link Latency
•
•
•
•
•
•
•
•
Finding Feature Information
Prerequisites for Configuring Link Latency
• The switch displays the current round-trip time as well as a running minimum and maximum round-trip
• You can configure link latency for a specific access point using the switch GUI or CLI or for all access
Restrictions for Configuring Link Latency
• Link latency calculates the Control and Provisioning of Wireless Access Points (CAPWAP) response
OL-28697-01
Finding Feature Information, page 81
Prerequisites for Configuring Link Latency, page 81
Restrictions for Configuring Link Latency, page 81
Information About Configuring Link Latency, page 82
How to Configure Link Latency, page 83
How to Configure TCP MSS, page 86
Performing a Link Test (CLI), page 87
Configuration Examples for Configuring Link Latency, page 88
time. The minimum and maximum times continue to run as long as the switch is up or can be cleared
and allowed to restart.
points joined to the switch using the CLI.
time between the access point and the switch. It does not measure network latency or ping responses.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
13
C H A P T E R
81