hit counter script

Domain Name; Dns Settings - Cisco Small Business 200 Series Administration Manual

Small business 200 series smart switch
Hide thumbs Also See for Small Business 200 Series:
Table of Contents

Advertisement

IP Configuration

Domain Name

Static
-
—The entry was manually configured by a user.
Domain Name
The Domain Name System (DNS) translates domain names into IP addresses for the purpose of locating
and addressing hosts.
As a DNS client, the device resolves domain names to IP addresses through the use of one or more
configured DNS servers.

DNS Settings

Use the DNS Settings page to enable the DNS feature, configure the DNS servers and set the default
domain used by the device.
STEP 1
STEP 2
DNS—Select to designate the device as a DNS client, which can resolve DNS names into IP
addresses through one or more configured DNS servers.
Polling Retries—Enter the number of times to send a DNS query to a DNS server until the device
decides that the DNS server does not exist.
Polling Timeout—Enter the number of seconds that the device will wait for a response to a DNS
query.
Polling Interval—Enter how often (in seconds) the device sends DNS query packets after the number
of retries has been exhausted.
-
Use Default—Select to use the default value.
This value = 2*(Polling Retries + 1)* Polling Timeout
-
User Defined—Select to enter a user-defined value.
Default Parameters—Enter the following default parameters:
-
Default Domain Name—Enter the DNS domain name used to complete unqualified host names.
The device appends this to all non-fully qualified domain names (NFQDNs) turning them into
FQDNs.
Cisco Small Business 200 Series Smart Switch Administration Guide
Click IP Configuration > Domain Name System> DNS Settings.
Enter the parameters.
18
239

Advertisement

Table of Contents
loading

Table of Contents