Load Tabs Via The Tab Feeder (Optional) - Canon imagePRESS C7011VPS series Operation Manual
Hide thumbs
Also See for imagePRESS C7011VPS series:
- Operation manual (391 pages) ,
- Service manual (121 pages)
Table of Contents
Advertisement
Load tabs via the tab feeder (optional)
Introduction
Before you install the tab feeder, check the paper size of the tab feeder.
IMPORTANT
You cannot use A4 tab paper whose tab width is 13.5 mm / 35/64"or less, measured from the
edge.
13.5 mm
IMPORTANT
Make sure that you fan the sheets of tab paper well before placing them.
You can only load A4 or Letter tab paper to the tab feeder. Before you install the tab feeder you
must check the paper size of the tab feeder. If required, change the paper size of the tab feeder.
Adjust the media size of the tab feeder (optional) on page 145
See
NOTE
The following types of tab paper are available.
1
1
2
3
4
• Right order tab (1)
• Reverse order tab (2)
How to load the tab paper depends on the situation.
1. You want to print on the tab paper.
2. You want to print on the tab paper and insert the tab as a chapter page.
3. You want to insert a printed tab as a chapter page.
The following tables show how to load the tab per situation and output destination.
2
1
2
3
4
Load tabs via the tab feeder (optional)
Chapter 7 - Media handling
139
Advertisement
Table of Contents
