Apply Manually Adjusted Cmyk Curves To All Jobs - Canon imagePRESS C7011VPS series Operation Manual
Hide thumbs
Also See for imagePRESS C7011VPS series:
- Operation manual (391 pages) ,
- Service manual (121 pages)
Table of Contents
Advertisement
Apply manually adjusted CMYK curves to all jobs
Apply manually adjusted CMYK curves to all jobs
Introduction
Manual adjustment of CMYK curves for all jobs is system level. System-level CMYK curves are
added to the CMYK curves for media family calibration.
IMPORTANT
This adjustment applies to all files that use the media family/halftone combination.
Before you begin
For this procedure, the key operator password is required
Procedure
1.
Calibrate the printer.
2.
Touch [System] -> [Color adjustment] -> [Edit CMYK curves manually].
3.
Select the media family/halftone to adjust the CMYK curve.
4.
Press [Edit].
The window opens in [Basic mode].
5.
Make the adjustments.
• Use the colored slide bars to adjust the color adjustment curve by color.
• Use the + and - sign at the right of the K bar to adjust the density in one step.
6.
If required, touch [Advanced mode] in the upper-right corner.
The window opens by default with the color Cyan.
On the right, select the color to adjust.
On the left, select the areas to adjust.
At [Color clipping], you can define the clipping ranges.
At curves, you have three control points to adjust the calibrated CMYK curve.
7.
Repeat steps 3 to 6 for the next halftone.
8.
Touch the Save icon at the top to store the adjustments as a preset for later reuse.
358
Chapter 14 - Maintenance and print quality
Advertisement
Table of Contents
