• If you are installing a storage drive, pivot tab
to the rear of the converter as shown until the four tabs on the adapter are slide into the four notches
2
. Pivot the adapter as shown to remove it from the converter.
Figure 20. Removing the adapter from the converter
• If you are replacing a storage drive, do the following:
a. Remove the converter from the bracket. See step 5 on page 113.
b. Pivot tab
1
on the metal adapter upward and push the adapter to the rear of the converter as
shown until the four tabs on the adapter are slide into the notches
shown to remove it with the storage drive from the converter.
Figure 21. Removing the adapter from the converter
1
on the metal adapter upward. Then, push the adapter
1
2
1
2
2
. Then, pivot the adapter as
.
Chapter 11
Installing or replacing hardware
121