Fuel Filler Cap Inspection; Fuel Tank Inlet Valve Removal And Installation; Fuel Tank Inlet Valve Inspection - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (16 pages) ,
- Owner's manual (278 pages)
Table of Contents
Advertisement
1G-12 Fuel System:
Fuel Filler Cap Inspection
WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk of fire and
personal injury.
Remove cap (1), and check gasket for even filler neck
imprint, and deterioration or any damage. If gasket (2) is
in malcondition, replace cap.
NOTE
If cap requires replacement, only a cap with
the same features should be used. Failure to
use correct cap can result in fire and
personal injury.
Fuel Tank Inlet Valve Removal and Installation
WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk or fire
and personal injury.
Removal
1) Remove fuel tank referring to "Fuel Tank Removal
and Installation".
2) Remove fuel tank inlet valve (1) using flat head rod
(2) or the like.
CAUTION
!
Be careful not to damage fuel tank inlet
valve(1) with flat head rod (2) or the like.
S7RW0A1706010
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel tank referring to "Fuel Tank Removal and
Installation".
Fuel Tank Inlet Valve Inspection
I2RH01170008-01
WARNING
!
Before starting the following procedure, be
S7RW0A1706011
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk or fire
and personal injury.
Check fuel tank inlet valve for the following.
If any damage or malfunction is found, replace.
• Damage
• Smooth opening and closing
I7RW01170013-01
I2RH0B170018-01
S7RW0A1706012
I2RH0B170019-01
Advertisement
Chapters
Table of Contents
Troubleshooting
