Table of Contents
Advertisement
<Question 13> Try the following points.
Change the printing protocol to LPR.
"Basic Operations/Various Information for
Enable the LPR byte count.
"Basic Operations/Various Information for
Shorten the name of the file to be printed.
<Question 14> Is NetWare or SMB set properly?
When using NetWare
"Configuring
"Configuring the Protocol
When using SMB
"Configuring the Protocol
If you are using the DHCP server and WINS server, check if the servers are linked properly.
NetWare or SMB is set properly.
NetWare or SMB is not set properly.
<Question 15> Is the IP address set properly?
"Basic Operations/Various Information for Windows"
SMB printing does not support IP v. 6.
The IP address is set properly.
The IP address is not set properly.
<Question 16> Is the port to be used selected correctly?
"Basic Operations/Various Information for Windows"
The port is selected correctly.
The port is not selected properly.
The settings for NetWare or SMB are changed.
<Question 17> Is AppleTalk set properly?
"Configuring the Protocol Settings"
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
If printing does not work, proceed to <Question 13>.
If printing does not work, proceed to <Question 19>.
NetWare"
Settings"
Settings"
Or
manuals search engine
Windows"
Windows"
Try the following point.
Set [Network Delay Time] longer than usual.
"Specifying the Setting for Startup Waiting Time"
If printing does not work, proceed to <Question 15>.
Set NetWare or SMB properly.
To <Question 16>.
Set the IP address properly.
"Setting the IP Address (IP v. 4)"
To <Question 19>.
Create the appropriate port.
When using NetWare
"Network Settings for the Printer
(NetWare) (LBP6680x
When using SMB
"Network Settings for the Printer (SMB) (LBP6680x
Only)"
Only)"
Advertisement
Table of Contents
