Firmware Update - Canon TX-4000 Online Manual

Hide thumbs Also See for TX-4000:

Firmware update

Select this setting item from Device settings.

• The administrator password is required to change settings if it is enabled for changing settings using

the operation panel.

You can update the firmware of the printer, check the firmware version, or perform settings of a notification

screen, a DNS server and a proxy server.

• Only Check current version is available when Disable LAN is selected for Change LAN in LAN

• Install update

Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-

screen instructions to perform update.

• When you use this function, make sure the printer is connected to the Internet.

• If the firmware update is not complete, check the following and take an appropriate action.

• Check the network settings such as a wireless router.

• If Cannot connect to the server. is displayed on the touch screen, select OK and try again

after a while.

• Check current version

You can check the current firmware version.

• Update notification setting

When Yes is selected and the firmware update is available, the screen to inform you of the firmware

update is displayed on the touch screen.

• DNS server setup

Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,

follow the display on the touch screen to perform settings.

• Proxy server setup

Performs settings for a proxy server. Follow the display on the touch screen to perform settings.

Show Quick Links