Appendix 3 Installing The Maintenance Printer Driver - Brother DCP-J4110DW Service Manual
Inkjet printers
Hide thumbs
Also See for DCP-J4110DW:
- Basic user's manual (123 pages) ,
- Quick setup manual (41 pages) ,
- Guía del usuario de software manual (246 pages)
Table of Contents
Advertisement
APPENDIX 3. INSTALLING THE MAINTENANCE PRINTER DRIVER
To identify machines connected via USB direct interface, the PC requires the corresponding
driver for the virtual USB device. If you connect any number of machines to your PC, the same
number of virtual USB devices will be automatically configured on your PC. To prevent many
virtual USB devices from being configured, use the unique driver installation procedure
described below that enables your PC to identify terminals via one single virtual USB device.
NOTE: Once this installation procedure is carried out for a PC, no more driver/software
installation will be required for that PC to identify machines. If the Brother Maintenance USB
Printer driver has been already installed to your PC according to this procedure, skip this
section.
Windows 2000/Windows XP
(1) Check that the power switch of the machine is turned off. Disconnect the USB cable that
connects the machine with your PC.
(2) Turn on your PC.
(3) Turn on the power switch of the machine.
(4) Switch the machine to the maintenance mode. (Refer to
(5) Connect the machine to your PC using a USB cable.
The following window appears.
(6) The following screen appears, indicating the detection of new hardware device by the
system. Select "No, not this time." And click Next.
Chapter
App. 3-1
5.)
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
