Abnormal Stop Of Purge Cam Being Driven; Pump Of Maintenance Unit Stopped Abnormally During Exhaustion/Suction; Excessive Current Protection Activated For The Driver Ic During Purge Cam Operation; Excessive Current Protection Activated For The Driver Ic During Pump Operation - Brother DCP-J4110DW Service Manual
Inkjet printers
Hide thumbs
Also See for DCP-J4110DW:
- Basic user's manual (123 pages) ,
- Quick setup manual (41 pages) ,
- Guía del usuario de software manual (246 pages)
Table of Contents
Advertisement
Error Code 5A
Unable to Print 5A
Abnormal stop of purge cam being driven.
Error Code 5B
Unable to Print 5B
Pump of maintenance unit stopped abnormally during exhaustion/suction.
Error Code 5D
Unable to Print 5D
Excessive current protection activated for the driver IC during purge cam operation.
Error Code 5E
Unable to Print 5E
Excessive current protection activated for the driver IC during pump operation.
Step
1
Foreign materials in the
maintenance unit
2
PF encoder disk stained
3
PF encoder disk defective
4
PF encoder sensor defective
5
Ink supply tubes bent
6
Paper feed motor defective
7
Maintenance unit defective
8
Main PCB defective
Cause
Remove foreign materials.
Clean the PF encoder disk and flushing guide (refer
to
Replace the PF encoder disk.
Replace the PF encoder PCB ASSY.
Replace the ink refill ASSY.
Replace the paper feed motor.
Replace the maintenance unit.
Replace the main PCB ASSY.
2-41
Solution
Chapter 3, Section
1.)
LCD
LCD
LCD
LCD
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
