Move Of The Head/Carriage Unit To The Center (Maintenance Mode 75) - Brother DCP-J4110DW Service Manual
Inkjet printers
Hide thumbs
Also See for DCP-J4110DW:
- Basic user's manual (123 pages) ,
- Quick setup manual (41 pages) ,
- Guía del usuario de software manual (246 pages)
Table of Contents
Advertisement
1.3.28 Move of the Head/Carriage Unit to the Center (Maintenance mode 75)
< Function >
This function is used to remove paper particles and dust accumulated between the maintenance
unit and head/carriage unit. Using this function moves the head/carriage unit to the center of its
travel, allowing you to easily remove the paper particles and dust accumulated.
< Operating Procedure >
(1) Press the 7 and 5 keys in this order in the initial stage of the maintenance mode.
The "PLS OPEN COVER" appears on the LCD.
The head/carriage unit moves to the center of its travel.
(2) Open the scanner cover.
The "PLS CLOSE COVER" appears on the LCD.
(3) Remove the paper particles and dust accumulated.
(4) Close the scanner cover.
The head/carriage unit moves back to the home position and the machine returns to the
initial stage of the maintenance mode.
TIP: Holding down the X key with the document scanner unit opened for at least five seconds
can also move the head/carriage unit in the same manner as above.
5-55
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
