Table of Contents
Advertisement
3. Turn on VRRP and configure two Virtual Interface Routers.
4. Enable tracking on ports. Set the priority of Virtual Router 2 to 101, so that it
5. Configure ports.
6. Turn off Spanning Tree Protocol globally.
456
NE2552E Application Guide for ENOS 8.4
NE2552E(config)# router vrrp
NE2552E(config-vrrp)# enable
NE2552E(config-vrrp)# virtual-router 1 virtual-router-id 1
NE2552E(config-vrrp)# virtual-router 1 interface 1
NE2552E(config-vrrp)# virtual-router 1 address 192.168.1.200
NE2552E(config-vrrp)# virtual-router 1 enable
NE2552E(config-vrrp)# virtual-router 2 virtual-router-id 2
NE2552E(config-vrrp)# virtual-router 2 interface 2
NE2552E(config-vrrp)# virtual-router 2 address 192.168.2.200
NE2552E(config-vrrp)# virtual-router 2 enable
becomes the Master.
NE2552E(config-vrrp)# virtual-router 1 track ports
NE2552E(config-vrrp)# virtual-router 2 track ports
NE2552E(config-vrrp)# virtual-router 2 priority 101
NE2552E(config-vrrp)# exit
NE2552E(config)# vlan 10
NE2552E(config-vlan)# exit
NE2552E(config)# interface port EXT1
NE2552E(config-if)# switchport mode trunk
NE2552E(config-if)# switchport trunk allowed vlan add 10
NE2552E(config-if)# exit
NE2552E(config)# vlan 20
NE2552E(config-vlan)# exit
NE2552E(config)# interface port EXT2
NE2552E(config-if)# switchport mode trunk
NE2552E(config-if)# switchport trunk allowed vlan add 20
NE2552E(config-if)# exit
NE2552E(config)# no spanning-tree stp 1
- Quick Links:
- Part 3: Switch Basics
Hide quick links:
Advertisement
Table of Contents
