Table of Contents
Advertisement
COPIER > OPTION > IMG-MCON
TMC-SLCT
2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PRN-FLG
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
SCN-FLG
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Set error diffusion process coefficient
To set coefficient to be used for error diffusion processing.
Make the setting according to the level of granularity and dot stability.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Small granularity/low dot stability
1: Small granularity/low dot stability (color mode), Large granularity/high dot stability (black mode)
2: Large granularity/high dot stability
2
Select of image area flag (PDL image)
To set the image area flag for image processing which is performed when a PDL image fails to be
compressed at a specified compression rate.
If an image fails to be compressed at a specified compression rate, the following processing is
performed by default:
- Processing to prioritize text reproduction
- Replacement of the processed black with single Bk-color
Set 1 when moire occurs or jaggy is significant. Set 2 when not preferring to replace the processed
black with single Bk-color.
- When moire occurs or jaggy is significant in case of printing an image containing many halftone
dots or photos
- When avoiding to replace the processed black with single Bk-color
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This setting trades off with reproducibility of text.
0 to 2
0: High screen ruling, gray compensation LUT
1: Error diffusion, gray compensation LUT
2: High screen ruling, normal LUT
0
Select of image area flag (copy image)
To set the image area flag for image processing which is performed when a scanned image fails
to be compressed at a specified compression rate.
If an image fails to be compressed at a specified compression rate, processing to prioritize
reproduction of text is performed by default.
Set 1 when an image contains many halftone photo images. Set 2 when an image contains many
printed photos.
When copying an image which contains many halftone dots and photos
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This setting trades off with reproducibility of text.
0 to 2
0: Text, 1: Halftone photo image, 2: Printed photo
0
947
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
