5. Open the latches on both sides of the memory slot at the same time
2
module
.
6. Insert the new memory module into the memory slot at an angle of about 20 degrees
memory module downward until it snaps into place
in the memory slot and cannot be moved easily.
7. Reinstall the base cover assembly.
8. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the hard disk drive
Before you start, read "Important safety information" on page v and print the following instructions.
Attention: The hard disk drive is sensitive. Inappropriate handling might cause damage and permanent loss
of data.
86
E480, E485, and R480 User Guide
1
, and then remove the memory
2
. Ensure that the memory module is firmly installed
1
. Pivot the