Using An External Display - Lenovo ThinkPad E485 User Manual

Hide thumbs Also See for ThinkPad E485:

Hardware maintenance manual (102 pages)

Setup manual (8 pages)

Setup manual (6 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

Table of Contents

Installing a media card

To install a media card, do the following:

1. Locate the appropriate type of slot for your card. See "Computer controls, connectors, and indicators"

on page 1.

2. Ensure that the metal contacts are facing down and toward the card slot.

3. Press the card firmly into the card slot.

If the plug-and-play feature is not enabled, do the following:

1. Go to Control Panel.

2. View Control Panel by Category. Click Hardware and Sound.

3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the

password or provide confirmation.

4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.

5. Follow the instructions on the screen.

Removing a media card

Attention:

• Stop all the activities involving the card before removing it. Otherwise, data on the card might get

damaged or lost.

• Do not remove a card while the computer is in sleep or hibernation mode. Otherwise, the system might

not respond when you try to resume operation.

To remove a media card, do the following:

1. Click the triangular icon in the Windows notification area to show hidden icons.

2. Right-click the Safely Remove Hardware and Eject Media icon.

3. Select the corresponding item to eject the card from the Windows operating system.

4. Press the card to eject it from your computer.

5. Remove the card and store it safely for future use.

Note: If you do not remove the card from your computer after you eject the card from the Windows

operating system, the card can no longer be accessed. To access the card, you must remove it first, and

then insert it again.