Replacing The Speaker Assembly - Lenovo ThinkPad E485 User Manual
Hide thumbs
Also See for ThinkPad E485:
- Hardware maintenance manual (102 pages) ,
- Setup manual (8 pages) ,
- Setup manual (6 pages)
Table of Contents
Advertisement
6. Reinstall the base cover assembly.
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the speaker assembly
Before you start, read "Important safety information" on page v and print the following instructions.
To replace the speaker assembly, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 76.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Replacing the base cover assembly" on page 83.
5. Detach the connector of the speaker assembly
position
2
.
6. Remove the screws that secure the speaker assembly
1
and then release the speaker cables from the secured
1
, and then remove the speaker assembly
2
.
Chapter 9
Replacing devices
.
95
Advertisement
Table of Contents
Troubleshooting
