Table of Contents
Advertisement
3.4 Recommended Floor Space Requirements
For a fully configured imagePRESS 1110+, it is recommended that there be at
least 45' (W) x 12' (D) of floor space.
39.4"
IMPORTANT
• The imagePRESS 1110+ was created to be modular in design. Floor space,
budget, monthly copy/print volume, and applications will determine which
configuration works best.
• If the SDD Square Fold Booklet-Maker with Two-Knife Trimmer is attached to the
machine, make sure that there is approximately 41.2" (1,046 mm) of space
added to the installation space and floor design.
• Some type of finishing option (Saddle Finisher-AK2, Finisher-AK1, or High
Capacity Stacker-E1) is required.
• Any configuration of up to 3-POD Decks-C1 (at least one POD Deck must be
attached) and 2-High Capacity Stackers-E1 may be attached to the machine at
once. The Saddle Finisher-AK2, Booklet Trimmer-D1, and Two-Knife Booklet
Trimmer-A1 may be connected at the same time as well.
3.5 Floor Structure Requirements
The floor on which this machine is installed must have strength of at least
2
92.2 lb/ft
(450 kg/m
building contractor before installing the machine.
The weight of the machine is distributed on the floor through the adjusters and
wheels. Do not install the machine on an unstable floor or platform.
Version 3
2
). If the floor does not have this level of strength, consult a
imagePRESS 1110+ Customer Expectations Document
45' (13.7 m)
456.6"
39.4"
Page 15
Advertisement
Table of Contents
